FiiO

FiiO BTR13

₹8,299

This is the full price. Free shipping across India.

Imported to order. Ships in 10 to 15 days.

A small clip-on Bluetooth receiver and USB DAC/amp that a three-way switch sets up for a computer, for Bluetooth or for use with a phone. Two CS43131 DACs, one for each channel, drive 3.5 mm and 4.4 mm balanced outputs, with LDAC and aptX Adaptive on the wireless side.

  • PC, BT and PHONE switch: computer sound card, Bluetooth receiver or phone dongle
  • Qualcomm QCC5125 and Bluetooth 5.1 with LDAC, aptX Adaptive, aptX HD, aptX LL, aptX, AAC and SBC
  • Two CS43131 DACs, one per channel, with 3.5 mm and 4.4 mm balanced outputs
  • Up to 220 mW per channel from the 4.4 mm output into 32 Ω
  • 0.96-inch colour IPS screen and global PEQ through the FiiO Control app or the web
  • Patented car mode switches it on and off together with the car; the 3.5 mm jack supports CTIA in-line mic and controls
  • 12-month warranty, handled by Otoya in India
  • Replacement or full refund if it arrives damaged, faulty or not what you ordered. Tell us within 7 days of delivery.
  • Cancel for a full refund any time before it ships
Returns and warranty policy

Specifications

Bluetooth chip
Qualcomm QCC5125 (CPU + DSP dual-core)
DAC chip
Dual CS43131 (one per channel)
Bluetooth
5.1
Codecs
AAC, SBC, aptX, aptX LL, aptX Adaptive, aptX HD, LDAC
USB DAC
Driver-free, PCM up to 96 kHz/16 bit
Outputs
3.5 mm single-ended, 4.4 mm balanced
Output power, 3.5 mm
≥100 mW + 100 mW (32 Ω), ≥10 mW + 10 mW (300 Ω), THD+N <1%
Output power, 4.4 mm
≥220 mW + 220 mW (32 Ω), ≥55 mW + 55 mW (300 Ω), THD+N <1%
Frequency response
20 Hz–40 kHz (−3 dB)
Signal-to-noise ratio
≥125 dB (3.5 mm), ≥128 dB (4.4 mm), A-weighted
Noise floor
<1 μV (A-weighted), both outputs
THD+N
<0.0018% (3.5 mm: 1 kHz/−4 dB @ 32 Ω; 4.4 mm: 1 kHz/−6 dB @ 32 Ω)
Output impedance
<0.6 Ω (3.5 mm), <1 Ω (4.4 mm)
Recommended impedance
8–150 Ω (3.5 mm), 8–350 Ω (4.4 mm)
Display
0.96-inch 80 × 160 colour IPS
In-line controls
CTIA standard; play/pause and volume
Microphone
Built-in omnidirectional mic for Bluetooth calls
Battery
460 mAh lithium polymer
Battery life
About 8 hours over Bluetooth (AAC); ≥10 hours in phone dongle mode
Charging time
≤2 hours
Size
About 63.2 × 30 × 18.8 mm including back clip
Weight
About 28.6 g

In the box

  • BTR13
  • Screen protector (pre-installed)
  • Dual Type-C data cable
  • Lanyard
  • Quick start guide

Good to know

  • Available in Black and Blue.